Red Dotted Lampwork Glass Beads are large and chunky and sold in 4 ounce assortments of approximately 18+ pieces. These beads are competitively priced by weight for use in mosaic art, but the diameters of most of these beads are 1/2 inch or more, which means they best pressed into mortar or concrete instead of being glued to a flat surface.
This is a problematic question because beads was intended to be used as an accent instead of as area coverage, and the piece size can vary. One 4-ounce assortment covers roughly 3+ square inches.
The Red Dotted Lampwork Glass Beads are usually 1/2 inch or larger in diameter, which is thicker than mosaic of the glass mosaic tile we sell. For this reason, these beads are best used by pressing into a bed of thinset mortar or a stepping stone mold filled with concrete.
Cutting Red Dotted Lampwork Glass Beads
These beads are too large to be cut using a Mosaic Glass Cutter because they won’t fit into the jaws. These beads are best used uncut.
Red Dotted Lampwork Glass Beads 4oz
- Price is per 4 ounces. (Approximately 18+ pieces.)
- Diameter: ROUGHLY 1/2 inch.
- Length: 0.5 to 1 inch.
- Coverage: should cover roughly 3+ square inches.
- Material: glass of varying degrees of translucence.
- frost proof.
- impervious to liquids.
- Suitable for indoor and outdoor installation.
- Not suitable for floors.
How To Make Mosaic Art
For more advice on designing your mosaic project or mounting, cutting, and grouting tile, please see our page of Mosaic Frequently Asked Questions or our Mosaic Information Guide, which lists instructional pages described by topic. We also post new articles about making mosaics at our How to Mosaic Blog.