Morjo ™ 8mm Recycled Glass Mosaic Tile

100 pieces 8mm glass tile on removable paper sheet

Clear
SKU: morjo-8mm-recycled-glass-mosaic-tile Category: Tags: , , , , , , ,

Description

8mm Recycled Glass Mosaic Tile by MORJO Mosaic Tile are sold on removable paper sheets of 100 tiles glued face down with chalky-backs showing. (Remove paper and chalky mold release by soaking for about 1/2 hour.) Each sheet covers approximately 1/12 of a square foot assuming a grout gap of ~1/32 inch. These tiles have a glossy finish, and the glass has solid color throughout (not just on the tops or bottoms.) Opaque when mounted on an opaque surface. Back sides are chalky, but they wash clean when the paper is soaked off the faces. More details below:

Chalky BACKS of tile are showing. The faces are nice and glossy, but they come face down on the removable paper sheets. Soak the tiles for about a half hour to remove the paper.

These wonderful tiles cut cleanly into tiny pieces with minimal waste, so they are an ideal material for micromosaic artwork. They are hard and durable and UV-resistant and can be used for the exteriors of commercial buildings. The fusing process for making these tiles from powdered recycled glass is referred to as “warm glass” or “enamel glass” or “pate de verre.” Mounting grids are available.

Soaking To Remove Paper

Soaking to remove paper is NOT extra work! Why not? Because you should always rinse loose tile to remove glass dust created during shipment. These tiles are glued with starch glue, which turns to jelly in water and is rinsed away. Please do not order if that is a problem. These are a premium material intended for artists wanting the best colors at a competitive price. Soak for less than 1/2 hour to avoid turning the paper to pulp.

White Chalk on Bottoms

There is factory chalk on the bottoms of the tiles, which rinses off easily in the soaking process. The tiles look as photographed on our website once soaked free of the paper.

Using Sheets? WARNING

These are mounted on paper, but the spacing isn’t perfect due to the small size of the tile, which could be an issue if you are mounting whole sheets to cover areas. DO NOT ORDER IF THAT IS A PROBLEM FOR YOUR PROJECT. All that being said, you could pull off any tiles that aren’t exactly in line and mount those later, which is the standard method for dealing with irregularities in sheet-mounted tile. We recommend using larger tiles for covering architectural surfaces.

Morjo 5/16-Inch Recycled Glass Mosaic Tile

  • tile size: 8mm (~5/16 inch)
  • thickness: 1/8 nominal (4mm), but runs slightly thicker than most other brands nominally 4mm. Can be used with other brands.
  • sales unit: 100 tiles temporarily mounted face down on paper.
  • sheet size: 3.5 x 3.5 inches (~1/12 square foot).
  • material: glass
  • variety: recycled glass
  • pigments: colorfast, UV resistant
  • durability: frost-proof, impervious to liquid
  • usage: suitable for indoor and outdoor use

Coverage

Each sheet of 100 tiles is a little over 3.5 inch x 3.5 inch and covers approximately 1/12 of a square foot assuming a standard grout gap of 1/32 inch. Use our tile estimator to calculate how much you need for your grouted project. For no grout gap, you will need about 11.8 sheets to cover each square foot.

Grout Gap?

Note that dry indoor mosaics do not have to be grouted (and thus you can simply mount the tiles tightly together), but outdoor and wet mosaics must have grout to prevent water from penetrating behind the tiles. The best way to ensure that the gaps between the tiles is to leave a 1/32-inch gap instead of pressing them tightly together, and this point seems counterintuitive to some people. Consider this: you can never mount them so closely together that water can’t penetrate it, but you can accidentally put them so close that grout doesn’t get adequately pressed into the crack during the grouting process.

Compatibility

These tiles have a NOMINAL thickness of 1/8 inch (4mm), which is the same nominal thickness as most of the glass tile we sell, but these run slightly thicker than Elementile and vitreous. Most users won’t notice the difference. These can be used with other brands of tile that is nominally 4mm thick.

Cutting Morjo 8mm Glass Mosaic Tile

The MORJO brand cuts like butter into tiny pieces using a pair of Mosaic Glass Cutters. You can make tiny cubes without a lot slivers or cutting waste. This makes them ideal for micromosaic or rendering small details in larger work.

Use in Mosaic Art

The color palette of the Morjo Recycled Glass Mosaic Tile is rich in hue and tint, and this makes it a professional rendering tool suitable for portraiture and murals. The material cuts very cleanly into small pieces that can be used for micromosaic artwork.

Quickly Order Using Checkist

Enter some quantities and click our new time-saving button for “Add All to Cart” at the top or bottom of the list.

; ;