Millefiori Gems 10mm-12mm (3/8 inch to 1/2 inch) are the rounded gems used to make millefiori beads, but they do not have beading holes and are used for mosaic art. The sides are rounded so the pieces are ovoid bead-shapes instead of being cylinders with straight edges like standard millefiori. The gems are sold in 2-ounce units (approximately 50+ pieces) and are much cheaper than traditional Italian millefiori.
Note that the designs are fairly uniform, and there aren’t many different designs, usually only three or four designs per color. Don’t expect an assortment of many different designs.
What Is Millefiori?
Millefiori is a traditional form of art glass that is disk-shaped with different multicolored patterns and is used in glass fusing, jewelry, and mosaic art.
This is a problematic question because the millefiori was intended to be used as an accent instead of as area coverage, and the piece size can vary. That being said, one 2-ounce bag should cover roughly 5 or 6 square inches, but that will depend somewhat on how efficiently you nest the pieces.
The thickness is about 1/8 inch and is the nominal thickness of most of the glass mosaic tile we sell, so it should be fairly easy to incorporated these into your art.
Cutting Millefiori Gems
Millefiori Gems can be cut using the Mosaic Glass Cutter we sell, but these are small enough to use without cutting.
Millefiori Gems 10mm-12mm
- Price is per 2 ounces (approximately 50+ pieces)
- Diameter: approximately 10mm to 12mm (3/8 inch to 1/2 inch).
- Thickness: roughly 1/8 inch.
- Coverage: each 2 ounce bag should cover roughly 5 or 6 square inches.
- Material: glass with color throughout.
- Coefficient Of Expansion (COE): 90.
- frost proof.
- impervious to liquids.
- Suitable for indoor and outdoor installation.
- Not suitable for floors.
Using Millefiori Gems In Mosaic Art
Millefiori Gems are more consistent in thickness than most millefiori assortments. They can be used in thinset mortar for mosaic art in outdoor and wet projects. For dry, indoor projects, you can attach it to backers with a high-quality white PVA adhesive like the Weldbond we sell. A pair of tweezers are indispensable for positioning the tiny pieces like these and keeping your fingertips cleaner of glues and cements.
How To Make Mosaic Art
For more advice on designing your mosaic project or mounting, cutting, and grouting tile, please see our page of Mosaic Frequently Asked Questions or our Mosaic Information Guide, which lists instructional pages described by topic. We also post new articles about making mosaics at our How to Mosaic Blog.;